A Background In Solar Training

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Solar Thermal Energy – By using different technologies, Solar Energy is effectively made up of two types of solar panels. As a first strategy, we have Solar Water Heating Collectors – which basically creates hot water from solar energy. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. Solar Water heating systems are extremely important – and can provide over half of the hot water needs for houses within the UK. The typical cost for installation ranges from 500-1500 pounds for a DIY system, all the way through to 2-5k for a professional fit.

Biomass Energy Technology: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Due to its adaptability, it can produce a range of energy forms – from heat and electricity through to combinations of both. It is interesting to note that the UK has some of the largest quantities of Biomass material to generate electricity within Europe. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Also producing high yields of dry matter are the perennial grasses. Other less known materials within this field are Agricultural and Municipal Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.

Geo-Thermal Energy Technology: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Although heat pumps require energy to function, their rate of return is superb – being a four-fold benefit over the energy put in. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.

Wind Energy Systems: Wind Energy as a sustainable source of energy has been going on for millennia. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The ability to utilise wind generation is considered to be greatest in the UK. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Lastly, we have a discipline that the UK does well – namely Hydropower. Energy creation from moving water is very old – although it is now being done in new ways. It is this type of energy production that could meet 2 percent of all the UK’s demand.

Using a turbine, a Hydropower system can transform the energy of water into other forms. The important thing is that, without having to rely on water storage, the turbines can generate electricity. ‘Micro-Hydro’ however, uses the dam and sluice systems that have been made redundant by the larger national distributions. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. Installing systems like this could cost between 200 pounds and 3k per kW of energy created.

It is the growing worldwide energy requirement that is causing the growth in ‘Green Energy’. The UK remains one of the main beneficiaries of this technology.

Once again, it is the Electrician and Plumbing trades that are set to capitalise on the domestic installation process. Grants and financial aid is also set to increase within the EEC and the UK – as ‘Green Energy’ gets ever higher status. This is a new industry – but getting the right certification can only improve job security and opportunities for the future. Look for combined electrical and plumbing training, with a key emphasis on practical green systems and installation.

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.